Crestron Adagio AES User Manual

Crestron Adagio™ AES Entertainment System
Operation
Prior to using this section, refer to the QuickStart Guide (Doc. 6457) that is included
with the AES.
For instructions on using the APAD and the C2N-DBF12 with the AES refer to the
latest version of the Out-Of-The-Box Functionality Guide (Doc. 6493).
Operating the AES is broken down into three modes:
• Source Mode
• Room Mode
• Turn Off the System
Source Mode
Source mode is used to select and control sources that are connected to the AES. A
selected source can also be routed to any room or rooms connected to the AES or a
connected AAE.
Select a Source
To select a source:
• Press Source to put the AES in Source mode. The current controlled source
is displayed on the LCD.
Source Mode
S1 AM/FM
101.90 FM
Stereo
SOURCE
ROOM
HOUSE
MENU
BKLT
SCHED
DISPLAY
MORE
Control
• Turn the selection knob until the desired source is displayed on the LCD.
Rooms that are connected to the displayed source are indicated on the room
buttons.
• Press the ENTER button (or the soft button labeled Control if it is a device
that can be controlled by the AES) to select and control the source.
When using the out-of-the-box functionality, the AES can control tuner cards
installed in slots 1 and 2, an iPod connected to a CEN-IDOC, and an AAS (when
connected).
Controlling a Tuner
A tuner card installed in either slot one or two can be controlled by the AES front
panel.
The following assumes that a tuner card has been installed in slot one or two (or
both) as described in the tuner card’s guide.
Operations Guide – DOC. 6456B Entertainment System: Adagio AES • 37

Crestron Adagio AES Specifications

General

Brand	Crestron
Model	Adagio AES
Category	Home Theater System
Language	English