Crestron C2N-CBD - Programming with Crestron Systembuilder or D3 Pro

Cameo
™
Keypads Crestron C2N/C2NI-CB Series
• (Optional) SystemBuilder version 2.0 or later with
SystemBuilder Templates version 2.0.1or later. Requires the
following software versions:
o PC with Windows 2000 or XP
o SIMPL Windows version 2.06.20 or later with library
update file 352 or later. Requires SIMPL+ Cross Compiler
version 1.1.
o Crestron database 17.3.3 or later
o Vision Tools Pro-e 3.3.4.0 or later
o Crestron Toolbox 1.01.11 or later
o Engraver 2.5 or later
• (Optional) D3 Pro version 2.0 or later with D3 Pro Templates
1.0 or later. Requires the following software versions:
o PC with Windows 2000 or XP
o SIMPL Windows version 2.06.20 or later with library
update file 352 or later.
o Crestron database 17.3.3 or later
o Vision Tools Pro-e 3.3.4.0 or later
o Crestron Toolbox 1.01.11 or later
o Engraver 2.5 or later
o CUZ 3.137 for 2-Series processors or later
• Crestron Engraver version 2.5 (required if using SystemBuilder
or to produce custom labeling for the buttons).
Programming with Crestron SystemBuilder or
D3 Pro
The easiest
method of
p
rogramming,
but does not
offer as much
f
lexibility
as SIMPL
Windows.
Crestron SystemBuilder offers automatic programming for such
residential and commercial applications as audio distribution, home
theater, video conferencing, and lighting. The interface of this tool guides
you through a few basic steps for designating rooms and specifying the
control system, touchpanels, devices, and functionality. Crestron
SystemBuilder then programs the system, including all touchpanel
projects and control system logic.
24 • Cameo™ Keypads: C2N/C2NI-CB Series Operations & Installation Guide - DOC. 6346A