Crestron DGE-100 Quick Start

Mount on a Flat Surface
Mount the device onto a flat surface with four mounting screws (not
included).
Connect the Device
Connect the device as called out in the following illustrations. Use
Crestron power supplies for Crestron equipment.
NOTES:
l The DGE-100 does not require a connection to the included power
pack if PoE (Power over Ethernet) is used to power the device. Use
one or the other, but not both at the same time.
l The DM-DGE-200-C does not support PoE or PoDM (Power over
DM® input) and must be powered by the included power pack.
2
DGE-100/DM-DGE-200-C
QuickStart
Digital Graphics Engines

Crestron DGE-100 Specifications

General

Brand	Crestron
Model	DGE-100
Category	Engine
Language	English