Crestron RMC3 - Page 11

Crestron RMC3 3-Series Room Media Controller
RMC3 Specifications (Continued)
SPECIFICATION DETAILS
Communications
Ethernet 10/100 Mbps, auto-switching,
auto-negotiating, auto-discovery,
full/half duplex, industry-standard
TCP/IP stack, UDP/IP, CIP,
DHCP, SSL, IEEE 802.1X,
SNMP, BACnet/IP
2
, IPv4 or IPv6,
Active Directory authentication,
web server, SMTP e-mail client,
installer setup via Crestron
Toolbox or MSIE
3
, IEEE 802.3af
and 802.3at Type 1 compliant
Cresnet Cresnet master mode
USB Supports computer console and
USB mass storage devices via
USB OTG (On-The-Go) port
RS-232/422/485 For 2-way device control and
monitoring;
Supports RS-232, RS-422, or
RS-485 up to 115.2 kBd with
hardware and software
handshaking
IR/Serial Supports 1-way device control via
infrared up to 1.2 MHz or serial
TTL/RS-232 (0-5 V) up to
115.2 kBd
Power
Power over Ethernet
4
IEEE 802.3at Type 1 (802.3af
compatible) Class 0 (12.95 W)
PoE Powered Device
Default Net ID 02
(Continued on following page)
Operations
& Installation Guide – DOC. 7558B Room Media Controller: RMC3  7