Need help?Do you have a question about the Crestron CP2 and is the answer not in the manual?
General| Model | CP2 |
|---|---|
| Type | Control Processor |
| Ethernet Ports | 1 |
| RS-232 Ports | 2 |
| IR Ports | 2 |
| Digital I/O Ports | 8 |
| Analog I/O Ports | 4 |
| Communication | Ethernet, RS-232 |
| Serial Ports | 2 |
| Power Requirements | 24V DC |
| Processor | ARM |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
Introduction to the rear panel connectors and their functions.
Configuring Versiports (C2I-IO8) and relay outputs (C2Y-RY8).
Controlling Ethernet devices and configuring the IP Table.
Configuring PC for serial communication with the CP2/CP2E.
Configuring PC for TCP/IP communication with the CP2E.
Steps to resolve serial communication problems.
Common issues and corrective actions for the CP2/CP2E.
To Next Page
