Crestron RMC3 User Manual

3-Series Room Media Controller Crestron RMC3
The “RMC3 Setup” menu displays the IP address, hostname, and
MAC address of the device. It also allows access to various setup
and programming screens. The “RMC3 Setup” menu contains
buttons for Ethernet Setup, Application Setup, Input/Output
Control, Diagnostics, and About as shown in the illustration on
the previous page.
3. Click one of the following options:
 Ethernet Setup configures the RMC3’s Ethernet settings
and displays DHCP, hostname, IP address, subnet mask,
default router, domain, and MAC address settings.
 Click Advanced Settings to specify DNS servers, web
server settings, and SSL settings.
 Click MyCrestron Dynamic DNS to configure the
myCrestron.com Dynamic DNS service.
 Click Ethernet Diagnostics to test Ethernet
communications.
 Click Reboot to reboot the RMC3.
 Application Setup selects programs to be loaded on startup
and controls which programs are running.
 Input/Output Control configures the COM ports, operates
the relays, and monitors the digital inputs.
 Diagnostics displays information about the connected
devices, hardware configuration, and error logs.
 About displays firmware information.
4. Click the
icon to return to the previous screen.
26  Room Media Controller: RMC3 Operations & Installation Guide – DOC. 7558B

Crestron RMC3 Specifications

General

Internal memory	0.256 GB
Storage media type	Flash
Internal storage capacity	4096 GB
Product color	Black
Heat dissipation	17 BTU/h
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth	73 mm
Width	128 mm
Height	35 mm
Weight	180 g