Crestron RMC3 3-Series Room Media Controller
To assist with troubleshooting, the RMC3 includes the Crestron
patent-pending Network Analyzer which continuously monitors the
integrity of the Cresnet network for wiring faults, marginal performance,
and other errors.
Onboard Control Ports
In addition to Ethernet, the RMC3 includes a variety of control ports for
interfacing with third-party equipment. A single bidirectional COM port
(RS-232/422/485) and two IR ports allow for interfacing with AV
devices, small appliances, and other equipment. Two programmable relay
ports are provided for controlling projection screens, lifts, power
controllers, door strikes, and other contact closure actuated equipment.
Two digital input ports enable the integration of occupancy sensors,
power sensors, door switches, or anything else that provides a dry contact
closure or low-voltage logic signal. Additional control ports, lighting and
motor controls, and other types of interfaces can be added easily using
Crestron DIN Rail Series lighting and automation modules.
BACnet/IP
Native support for the BACnet/IP communication protocol provides a
direct interface to third-party building management systems over
Ethernet, simplifying integration with HVAC, security, fire and life
safety, voice and data, lighting, shades, and other systems. Using
BACnet/IP, each system runs independently with the ability to
communicate together on one platform for a truly smart building.
*
* License required. The RMC3 supports a maximum of 500 BACnet objects when
dedicated for BACnet use only. Actual capabilities are contingent upon the
overall program size and complexity.
Operations
& Installation Guide – DOC. 7558B Room Media Controller: RMC3 5
To Next Page
Loading...
Need help?
General
Weight and Dimensions
