Crestron SIGNAMAX C-300 Series - Per VLAN IGMP Configuration

Crestron Solution Guide
- 7 -
2. Per VLAN IGMP Configuration
o
Navigate to Multicast->IGMP Snooping - > Interface
o
Choose Action: Configure VLAN
o
Choose the VLAN that the Crestron devices will use. By default this is 1
o
Enable IGMP Snooping Status
o
Enable Immediate Leave Status and select By-Group
o
Enable Multicast Router Discovery
o
Query Interval: 15
o
Proxy (Query) Address: 10.0.1.1
o
Click Apply