Need help?Do you have a question about the Crestron HD-MD6X2-4K-E and is the answer not in the manual?
General| Model | HD-MD6X2-4K-E |
|---|---|
| Number of Inputs | 6 |
| Number of Outputs | 2 |
| HDMI Inputs | 6 |
| HDMI Outputs | 2 |
| HDMI Version | 2.0 |
| HDCP | 2.2 |
| HDCP Compliance | Yes |
| Audio Support | Yes |
| EDID Management | Yes |
| Power Supply | 100-240V AC, 50/60 Hz |
| Type | HDMI Switcher |
| Maximum Resolution | 4K@60Hz |
| Video Resolutions | Up to 4K |
| Audio | HDMI Audio |
| Control | Ethernet, RS-232 |
| Control Interface | Ethernet |
| Form Factor | 1U Rack-Mountable |
Instructions on how to access the switcher's web interface by noting the IP address from the front panel OLED display.
Details on how to log in to the switcher's web interface using default or changed username and password credentials.
Explanation of the web interface navigation bar and its access to various configuration pages like Status, Routing, Inputs, Outputs, Network, and Device.
Configure input settings such as EDID and HDCP support via the web interface.
Configure output settings including route selection, renaming, and HDCP control via the web interface.
Set network parameters like hostname, IP address, subnet mask, and gateway via the web interface.
Procedure to enable or disable the front panel, OLED display, and LEDs on the switcher, including display default settings.
Steps to modify the default username and password for enhanced security access to the switcher.
Instructions for upgrading the switcher's firmware using either the upload firmware file option or the service port.
Guide on using the OLED push buttons and navigation pad to access and navigate the switcher's menu system.
Configure input settings including Global EDID and individual input status/EDID/HDCP via the OLED display.
Configure output settings including route selection, renaming, and HDCP control via the OLED display.
Configure network settings like DHCP status, IP address, subnet mask, and gateway via the OLED display.
Manage device settings like front panel control, firmware updates, and restore defaults using the OLED display.
Instructions for routing inputs to outputs using the physical push buttons on the HD-MD6X2-4K-E and HD-MD4X2-4K-E switchers.
Guide to routing inputs to outputs using the physical push buttons, including automatic routing, on the HD-MD4X1-4K-E switcher.
To Next Page
