Crestron HD-MD6X2-4K-E - Input Configuration via OLED Display

Supplemental Guide – DOC. 7761A HD-MD-6X2/4X2/4X1-4K-E: 4K HDMI Switchers
•
15
OLED Main Menu
<< Main Menu >>
Inputs
To navigate the main menu and submenus on the OLED display, do the following:
• To navigate upward in a menu, press the up button ( ) on the navigation pad.
• To navigate downward in a menu, press the down button ( ) on the navigation
pad.
• To move the cursor to the left when entering data, press the left button ( ) on the
navigation pad.
• To move the cursor to the right when entering data, press the right button ( ) on
the navigation pad.
• To select an item in a menu, press the
Enter
button on the navigation pad.
• To save a new setting, press the
Enter
button on the navigation pad.
• To go back to the previous level in a menu, press the
BACK
button on the front
panel.
• To exit the menu of the OLED display, press the
EXIT
button on the front panel.
Configuring Input Settings
To configure input settings, do the following:
1. On the main menu, select
Inputs.
The Inputs submenu opens.
Inputs Submenu
< Inputs >
Global EDID
Available selections are as follows:
Global EDID
Input 1
Input 2
Input 3
Input 4
Input 5 (applicable to the HD-MD6X2-4K-E only)
Input 6 (applicable to the HD-MD6X2-4K-E only
2. Configure inputs as follows:
a. (Optional) Select
Global EDID
.
The following message flashes across the OLED:
Apply EDID to All Inputs
i. Confirm the selection by pressing the
Enter
button. A list of EDID
files is presented.
DM default 4k 30Hz 2CH (Default setting)
DM default EDID
Laptop 16x10 1280x800 2CH
Laptop 16x10 1920x1200 2CH
Laptop 16x9 1080P50 2CH
Laptop 16x9 1080P 2ch



