Need help?Do you have a question about the Crestron HD-MD4X1-4K-E and is the answer not in the manual?
General| Category | Switch |
|---|---|
| Model | HD-MD4X1-4K-E |
| Output Ports | 1 |
| HDCP Support | HDCP 2.2 |
| EDID Management | Yes |
| HDMI Version | 2.0 |
| Resolution Support | Up to 4K@60Hz |
| Control | Ethernet, RS-232, IR |
| Power Supply | 12V DC |
| Weight | 0.5 lbs |
To access the web interface, note the IP address on the front panel OLED display and enter it into a web browser.
Log in to the web interface by entering the default username 'admin' and password 'admin' on the Login page.
Explore the web interface via the navigation bar, accessing pages for Status, Routing, Inputs, Outputs, Network, and Device.
View general and network details like model, serial number, firmware, hostname, and IP address on the Status page.
Set HDMI signal routes from any input to any output on the switcher using the Routing page.
Select and send EDID files to inputs, rename inputs, and enable/disable HDCP support for each input.
Configure output routing, rename outputs, and manage HDCP protection for each output.
Set hostname, DHCP mode, static IP address, subnet mask, and default gateway for the switcher.
Manage device settings including front panel state, username/password changes, and firmware upgrades.
Access and navigate the OLED display menu using the front panel push buttons and navigation pad.
Configure input settings via the OLED display, including Global EDID selection and individual input assignments.
Configure output settings via the OLED display, managing status, renaming outputs, and HDCP control.
Configure network settings via the OLED display, including status, DHCP, and manual IP address configuration.
Configure device settings via the OLED display, such as viewing details, managing the front panel, and firmware updates.
Route inputs to outputs using front panel push buttons for the HD-MD6X2-4K-E and HD-MD4X2-4K-E models.
Route inputs to the output using front panel push buttons and the AUTO function for the HD-MD4X1-4K-E model.
To Next Page
