Crestron HD-MD4X1-4K-E - Configuring Output Settings via OLED Display

Supplemental Guide – DOC. 7761A HD-MD-6X2/4X2/4X1-4K-E: 4K HDMI Switchers
•
17
Items on the Input Status and Configuration submenu are listed in the
following table. Refer to the table for configuration guidelines.
Input Status and Configuration Submenu Guidelines
SUBMENU
ITEM GUIDELINES
Status
(Read Only) Indicates whether a source is detected at the input:
Sync ON
or
Sync OFF
Name
Allows renaming of an input. To rename an input, use the up ( ) and
down ( ) buttons to enter capital letters, lowercase letters, numbers,
a plus sign (+), a minus sign (-), a left bracket ([), and a right bracket
(]). To move the cursor to the left or right when renaming an input,
press the left ( ) or right ( ) button, respectively. To save the name,
press the
Enter
button. The message
Saving… Complete
is
displayed.
EDID
Displays the current EDID. If an EDID other than the Global EDID is
to be assigned, select the desired EDID. Available selections are as
follows:
DM default 4k 30Hz 2CH (Default setting)
DM default EDID
Laptop 16x10 1280x800 2CH
Laptop 16x10 1920x1200 2CH
Laptop 16x9 1080P50 2CH
Laptop 16x9 1080P 2ch
Laptop widescreen 2CH
Consumer 4k 25Hz HBR 3D
Consumer 4k 30Hz HBR 3D
Consumer 1080P50 3D HBR
Consumer 1080P50 HBR
Consumer 1080P 3D HBR
Consumer 1080P HBR
Consumer 720P50 HBR
Consumer 720P HBR
External EDID 1
External EDID 2
External EDID 3
External EDID 4
External EDID 5
External EDID 6
External EDID 7
External EDID 8
Copy Output 1
Copy Output 2 (applicable to the HD-MD6X2-4K-E and
HD-MD4X2-4K-E only)
When an EDID is selected, the
Setting…
message is displayed.
NOTE:
In the list above,
External EDID 1
through
External
EDID 8
represent placeholders for custom-loaded EDID files.
HDCP
Enables or disables HDCP. Select
Enable
or
Disable
. The default
setting is
Enable
. An asterisk precedes the current setting.



