Need help?Do you have a question about the Crestron HD-MD4X1-4KZ-E and is the answer not in the manual?
Steps to reset the AV switchers to their original factory settings.
Process for updating the AV switcher's firmware.
Managing EDID files for display compatibility.
Settings for IP address, DHCP, DNS, and gateway.
Settings for automatic firmware updates.
Configure name, EDID, and HDCP for each input.
Detailed configuration for specific HDMI input parameters.
Detailed settings for HDMI output, including HDCP and blank video.
Set priority levels for automatic input routing.
Add, remove, and view local and Active Directory user accounts.
Set up IEEE 802.1X for network security and authentication.
Steps to reset the AV switchers to their original factory settings.
Process for updating the AV switcher's firmware.
Managing EDID files for display compatibility.
Settings for IP address, DHCP, DNS, and gateway.
Settings for automatic firmware updates.
Configure name, EDID, and HDCP for each input.
Detailed configuration for specific HDMI input parameters.
Detailed settings for HDMI output, including HDCP and blank video.
Set priority levels for automatic input routing.
Add, remove, and view local and Active Directory user accounts.
Set up IEEE 802.1X for network security and authentication.
General| Function | 4x1 HDMI Switcher |
|---|---|
| HDCP Compliance | HDCP 2.2 |
| Bandwidth | 18 Gbps |
| EDID Management | Yes |
| Video Resolutions | Up to 4K@60Hz |
| Maximum Resolution | 4K@60Hz |
| Control Interface | RS-232, Ethernet, IR |
| Power Supply | 12V DC |
| Weight | 2 lbs |
| Audio Support | LPCM, Dolby Digital, DTS |
To Next Page