EasyManua.ls Logo

Crestron SIGNAMAX C-300 Series User Manual

Crestron SIGNAMAX C-300 Series
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
C-300 Series Crestron Solution Guide
Question and Answer IconNeed help?

Do you have a question about the Crestron SIGNAMAX C-300 Series and is the answer not in the manual?

Crestron SIGNAMAX C-300 Series Specifications

General IconGeneral
ManagementCLI, SNMP
Operating Temperature0° to 50°C (32° to 122°F)
Storage Temperature-20° to 70°C (-4° to 158°F)
Humiditynon-condensing
Power over Ethernet802.3at PoE+
Dimensions440 x 250 x 44 mm (17.3 x 9.8 x 1.7 in)

Summary

How to Use This Guide

Who Should Read this Guide?

Identifies network administrators as the target audience and outlines prerequisite knowledge.

Related Documentation

References other guides for hardware installation and detailed configuration options.

C-300 Series Crestron Configuration via Web Interface

Internet Group Management Protocol (IGMP)

General IGMP Configuration

Details on configuring general IGMP snooping status and querier status.

Per VLAN IGMP Configuration

Explains per-VLAN IGMP configuration, including snooping, immediate leave, and router discovery.

Quality of Service (QoS)

Configure Trust Mode

Sets the trust mode to DSCP for ports used by Crestron devices.

Configure DSCP to Queue Settings

Maps DSCP values to specific queues for traffic prioritization.

Energy Efficient Ethernet (EEE)

Disable Energy Efficient Ethernet

Disables Power Saving Status on ports to ensure consistent network performance.

Startup Config

Saving the Configuration File

Instructions on how to save the current switch settings.

C-300 Series Crestron Configuration via Config File

Download Crestron Configuration File

Guide to downloading the required Crestron configuration file.

Login to Switch Web Interface

Instructions for logging into the switch's web interface.

Copy Configuration File to Switch

Steps to upload and apply the configuration file to the switch.

Finalizing Switch Configuration

Reset the Switch

Instructions for resetting the switch to apply configuration changes.

Complete the Switch Configuration

Steps for re-logging into the switch and performing localized configurations.

Related product manuals