DO GUIDE
DO Check the Box
QTY PRODUCT COLOR PART NUM.
1 Power Pack, 24 Vdc 0.75A, 100-240 Vac 2037209
Items for the HD-MD6X2-4K-E Only
4 Foot, 0.5" SQ x 0.23" H, Adhesive Black 2002389
2 Bracket, Rack Ear, 1U 2032122
Not included: Cables, Mounting Screws
Installing the HD-MD4X2-4K-E and HD-MD4X1-4K-E
Mounting onto a Flat Surface
Using four mounting screws (not included), mount the device onto a at surface such as the
underside of a table or onto a wall (refer to illustration ).
Mounting under a Table
Mounting onto a Rack Rail
The HD-MD4X2-4K-E and HD-MD4X1-4K-E mount onto the front or rear rail of a rack. Position
either the left or right mounting ange of the device so that the holes align with the holes in the
rack. Then, secure the device to the rack using two mounting screws (not included). Refer to
illustration .
Mounting onto a Rack Rail
HD-MD6X2-4K-E/HD-MD4X2-4K-E/HD-MD4X1-4K-E
4K HDMI
®
Switchers
DO Install the Device
The Crestron
®
HD-MD6X2-4K-E can be mounted into a rack or placed onto a at surface. The
HD-MD4X2-4K-E and HD-MD4X1-4K-E can be mounted onto a at surface or onto a rack rail.
Installing the HD-MD6X2-4K-E
Mounting into a Rack
The HD-MD6X2-4K-E occupies 1U of rack space. Using a #1 or #2 Phillips screwdriver, attach
the two included rack ears to the device (refer to illustration ). Then, mount the device into the
rack using four mounting screws (not included).
Attachment of Rack Ears to the HD-MD6X2-4K-E
Placing onto a Flat Surface
When placing the device onto a at surface or stacking it with other equipment, attach the
included feet near the corners on the underside of the device.
To Next Page
Need help?
General