Name: Crestron TSW-770
Brand: Crestron
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Configure the Touch Screen

When power is applied for the first time, the following screen is

displayed. The touch screen may take up to two minutes to boot.

Touch the screen to display the main Setup screen (TSW-1070 shown).

Device settings for the touch screen may be configured using the built-in

setup screens or the web configuration interface. For more information

on configuring the touch screen, refer to the TSW-570, TSW-770, and

TSW-1070 Product Manual.

Access the Device Setup Screens

To access the built-in setup screens, place five fingers on the display and

hold for 15 seconds.

Use the setup screens to configure various settings for the touch screen,

including Ethernet setup, IP table setup, audio setup, display setup,

standby timeout, application selection, Wi-Fi network setup,

diagnostics, the Bluetooth® beacon, and the virtual toolbar (model

dependent).

TSW-570, TSW-770, and TSW-1070

QuickStart

5 in., 7 in., and 10.1 in. Wall Mount Touch Screens

Other manuals for Crestron TSW-770

Questions and Answers:

Need help?

Do you have a question about the Crestron TSW-770 and is the answer not in the manual?

General