Need help?Do you have a question about the Crestron TSW-570 Series and is the answer not in the manual?
General| Brand | Crestron |
|---|---|
| Model | TSW-570 Series |
| Category | Touch Panel |
| Language | English |
Configure network settings via the touch screen's Ethernet interface.
Configure IP table entries for connecting to control systems.
Adjust master volume, media volume, and beep volume settings.
Adjust screen brightness, auto-brightness, and proximity wake settings.
Set device sleep duration and configure screensaver options.
Choose and configure the primary application for the touch screen.
Connect the touch screen to a wireless network by selecting an access point.
View and manage saved wireless network access points.
Configure the built-in proximity detection beacon using Bluetooth.
Display various visual test patterns for screen diagnostics.
Test the touch screen's responsiveness and accuracy.
View and test RTSP streaming protocol for video sources.
View and test the Ethernet connection and default router.
Test the functionality of the virtual toolbar buttons.
Test and configure the Rava SIP intercom functionality.
Perform a test of the built-in microphones.
View and test the Wi-Fi network connection status.
Access various functions like reboot, restore, and firmware updates.
Manually upgrade the touch screen firmware using a PUF file.
Upload a custom user project to the touch screen.
Update the currently selected application on the touch screen.
View general device information like model and serial number.
View the status of network settings for Ethernet and Wi-Fi.
View the status of room scheduling applications.
View the status of a connected control system.
Configure general network and touch screen settings.
Configure network proxy settings for the touch screen.
Configure settings for pairing the touch screen to a CEN-ODT-C-POE.
Configure various audio settings for the touch screen.
Enable or disable connection to an XiO Cloud service account.
Select an application to run on the touch screen.
Configure security and authentication settings for the touch screen.
Set up user authentication for accessing the touch screen.
Configure IEEE 802.1x network authentication for touch screen security.
To Next Page