9
4. Install Front Seat Back Rest
4.1. Gently guide both seat back support arms into the metal slots located behind the front seat. Install the
small knobs into the threaded inserts on
4.2. the rear of the metal slots to secure the seat back.
5. Install Rear Passenger Step Plate
5.1. Loosen both locking nuts located below the back seat and rear carrier rack. (Fig. 5.1.1)
5.2. Insert both step plate bars into the rear chassis frame tubing and gently guide both bars into the tubes.
Check that the step plate bars are all the way in and that the knobs are tightened securely. (Fig 5.2.1 and
5.2.2)
Figure 4.1.1 Figure 5.1.1
Figure 5.2.2
Figure 5.2.1
To Next Page
Loading...
