CS-872 / SP-202 and SP-302
KEYLESS ENTRY and ALARM SYSTEM
INSTALLATION INSTRUCTIONS
INTRODUCTION
CONGRATULATIONS on your choice of a Remote Keyless Entry and Alarm System by Crimestopper
Security Products Inc. This booklet contains the information necessary for installing, using, and maintaining
your alarm system. If any questions arise, contact your installation dealer or Crimestopper Security Products
Inc. at the Tech Support number below.
*IMPORTANT INFORMATION:
This system can be configured to operate as a Keyless Entry, 1-Way Alarm or 2-Way Paging Alarm System.
The type of system is option selectable (option #17). When selecting keyless entry, all features operate except
the alarm triggers are disabled.
This installation book is designed for the installer or individual with an existing understanding of
automotive electrical systems, along with the ability to test and connect wires for proper operation.
To ease installation, we suggest that you READ THIS MANUAL before beginning your installation.
This book is provided as a GENERAL GUIDLINE and the information contained herein may differ from
your vehicle.
TECH SUPPORT
Mon-Fri 8:00 AM-4:30 PM Pacific Time
(800) 998-6880
REV. 10-2012
This device complies with FCC Rules part 15. Operation is subject to
the following two conditions: 1) This device may not cause interference,
and (2) this device must accept any interference that may be received,
including interference that may cause undesired operation. The
manufacturer is not responsible for any radio or TV interference caused
by unauthorized modification to this equipment. Such modification
could void the user's authority to operate the equipment.
To Next Page
Need help?
General
