12
Note: when adjusting temperature, the numbers will appear on display from right to left in turn. If
adjusted temperature exceeds the allowed setting range for the selected oven function, a double
beep alert sound will be emitted when touching the <Start> button. Refer to the “User Manual”
for allowable temperature ranges for each oven function. If desired cooking temperature exceeds
adjustable temperature range for the oven function selected, choose alternate oven function with
temperature range matching desired cooking temperature.
· Cooking time adjustment: to modify/set a cooking time, when the default cooking time is
displayed, touch <Cook Time>. The time display --:-- will appear and blink. Input the desired
cook time by touching the corresponding number keys on the control interface. After the desired
cook time is set, the system prompts you to enter either delay start or start the operation. To
immediately start oven function, touch <Start> to start the oven function.
Note: Cooking time range has an allowable range of (0:00-11:59). Input a desired cooking time
in this range. If a cooking time value is entered that is outside of this allowable value range, a
double beep alert sound will be emitted and the next operation is not allowed until a cooking time
value within the allowable range is entered.
Note: Cooking time defaults at a factory setting of 2:00 hrs. If desired cook time is not set within
the allowable cooking time range, the oven default will default to 2 hr cook time.
Delay Start: If delayed start is required, user can set a delayed start time via control panel.
1. Touch <Delay Start>.
2. Time displayed on interface will be the current clock time.
3. Set desired start time by touching the number keys corresponding to the desired cook time on the
control panel interface. Note: delay start time is the time that the oven will start.
4. After setting the desired delay start time, touch the <Start> button. Interface screen will display a
time “count-down” to the delayed start time.
Note: Range has oven functions that require a pre-heating phase, and functions that do not require
a pre-heating stage.
Oven function with pre-heating stage:
· When the actual oven core temperature is less than 170˚ F, the interface displays “Lo”. When
the internal oven core temperature rises above 170˚ F, the interface will display the actual oven
temperature in real-time.
· When the actual temperature reaches the set value, the interface will continuously display the set
temperature value.
Oven function with no pre-heating stage required:
· The set temperature value will be displayed continuously on the interface once selected.
To Next Page
Loading...
