13
4. Self Clean Mode
This range is equipped with a self-clean function. To enable the self-clean mode follow these
instructions:
1. Touch the <Self-Clean> function on the control panel. The self-clean icon will illuminate.
2. Repeatedly touch the <Self-Clean> icon to toggle between self-clean time duration options.
3. Options are: 2:00 hrs | 3:00 hrs | 3:30 hrs
4. Toggle to desired time duration.
5. Touch <Start> to initiate the self-clean process. You will hear the oven door lock motor engage
and door will be locked. Lock icon on control panel will illuminate.
6. Self-clean function will start and continue through selected time duration. When the cleaning
cycle is complete, the oven will shut o, lock will disengage, and oven will begin to cool. (Note:
if oven lock does not disengage, press and hold the <Start> button to see if lock disengages.
Repeat if necessary until oven door lock disengages.)
7. Allow oven to cool down completely prior to opening oven door and cleaning oven interior.
8. To clean oven interior, wipe all surfaces with a damp cloth or sponge. Mild soap and water only,
no oven cleaning products.
Note: Start time of the self-cleaning function can be delayed. To delay start time of self-cleaning
function, after selecting the desired cleaning duration time, touch the <Delay Start> icon on control
panel. Time displayed on interface will be the current clock time. Set desired start time for self-clean
function by touching the number keys corresponding to the desired start time on the control panel
interface. After setting the desired delay start time for self-clean function, touch the <Start> button.
Interface screen will display a time “count-down” to the delayed start time.
To Next Page
Loading...
