- 7 -
The display will now show the mode for advanced
users
ADVANCE / FORTGES / AVANCE
ERVAREN / AVANZATO / FACIL
Or for beginners
EASY / EINFACH / FACILE
BEGINNER / FACILE / AVANCADO
Select a mode by pressing B. Confirm your selection
by pressing A.
Important: In easy mode only the following features
are available:
Speed, average speed, trip distance and trip timer.
In advanced mode all features are available and
settings for 2 bicycles can be stored.
C1 will now appear on the display. Set the
circumference of your tire in mm (see “Calculating
tire circumference”). Press B to set each digit and
press A to confirm each setting.
If you have selected advanced mode, you may now
enter the tire circumference for an additional bicycle.
To Next Page
Loading...
