- 6 -
Setup
The setup and installation of the bicycle computer is
described on the information sheet „installation“.
After installing the bicycle computer, please remove
the protective foil from the display and press any key
to start the computer.
Light
Press C briefly to activate the light temporarily.
Speed setting
When setting numerical values, press and hold B to
use the speed setting feature.
Basic settings
The setting mode for basic settings can be reached
by inserting a battery or performing a reset. To
perform a reset, press and hold A and B together
until {{-----}} appears. Now press and hold B.
The language selection will appear on the display.
Select a language (Englisch, German, French,
Dutch, Italian or Spanish) by pressing B. Confirm
your selection by pressing A.
To Next Page
Loading...
