CSP 12 A1
GB
│
IE
│
7 ■
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and unplug the
12 V vehicle connector plug before
starting any work on the appliance.
■ Do not use any sharp objects to clean the
appliance. Do not allow any liquids to get
into the appliance. Otherwise, the appliance
could be damaged.
■ The appliance is maintenance-free.
■ Clean the appliance regularly, preferably imme-
diately after use.
■ Clean the housing with a dry cloth – do not use
petrol, solvents or cleaners that can attack the
plastic.
■ Never obstruct the ventilation openings.
NOTE
► You can order replacement parts that are not
listed (such as adapter nozzles, switches)
via our Service Hotline.
► This appliance is maintenance free. Never
open the appliance. The appliance may only
be repaired by an authorised service centre
or Customer Service. If one of the faults listed
below occurs, note the following:
♦ Allow the appliance to cool down and wait a
short while for the residual energy to neutralise.
♦ Ensure that the appliance is in good working
condition.
Troubleshooting
Fault Solution
The appli-
ance does
not work
Check the power source. Check that
all cables, fuses and the mains socket
are in working order.
Do not use the appliance at tempera-
tures below 5°C.
Avoid overheating the motor. Allow
the motor to cool down.
Fault Solution
Slow or
abnormal
inflation
Check if the hose is clogged or
cracked.
The connection between the hose
and the appliance is not properly
installed.
Storage
■ Unplug the vehicle connector plug.
■ Store the appliance in a dry and secure environ-
ment.
■ Ensure that the appliance has cooled down
completely, otherwise there is a risk of burns.
■ Store the appliance so that it cannot be used by
unauthorised persons.
Disposal
Applies only to France
The product, its packaging and the operating
instructions are recyclable. They are subject to an
extended manufacturer responsibility and will be
collected separately.
To Next Page
Loading...
Need help?
General
