Owner's Manual VE-1P Vertical Edger
Page 5 of 33
SECTION 2 (continued)
SPECIFICATIONS
GLASS CAPACITY
THICKNESS SINGLE STRENGTH (.090”) TO 1/2”
(2.28mm TO 13mm)
LENGTH 12” TO 72” MACHINE SUPPORTED
(102mm TO 305mm)
HEIGHT 72 INCHES (1829mm) MAXIMUM
WEIGHT 250 POUNDS (113 kg) MAXIMUM
SPINDLE MOTOR 1-HP (.75 kw), 3600-RPM
MOTOR WITH 7” (203mm)
DIAMOND GRINDING WHEEL
The wheel has adjustments for height to set the wheel depth, angularity for the
glass thickness, an “In/Out” for wheel centering on the glass, and it can be
profiled for pencil or flat-seamed edges.
ELECTRICAL 1-PHASE, 60-HZ, 120 VOLT
1-PHASE, 50-60HZ, 220 VOLT
PLUMBING NO DIRECT HOOKUP REQUIRED.
WEIGHT APPROXIMATELY 750 POUNDS.
(340kg)
To Next Page
