Open your settings
menu and select
‘Wi-Fi® Network.’
Open the WeMo™ App.
The App will look for your
connected appliance.
When prompted, choose
your home network,
and enter the network
password.
Your Smart Slow Cooker will
now appear on the App’s main
menu. WeMo™ Remote Control
is now enabled. You will not
need to complete these initial
set-up steps again for your
Smart Slow Cooker.
A. Download the free WeMo™ App
from the Apple app store, Google
Play or Amazon app store.
B. Plug smart appliance into
electrical outlet.
C. Confirm your Wi-Fi® router is on.
D. Make sure your smart device
is connected to your home Wi-Fi®
network.
CONGRATULATIONS! You’re the proud owner of a Crock-Pot® Smart Slow Cooker enabled with WeMo™. Crock-Pot®, the original slow cooker brand and Belkin, the innovator of WeMo™,
bring you a state of the art slow cooker that’s designed to provide remote access to your home appliances. Easily monitor and manage your slow cooker with the assurance of quality and
reliability from brands you can trust. Now freeing yourself from daily tasks is easily done from anywhere using your smart device. More connected... more control... more convenience.
To get started, all you need is:
One or more WeMo™-enabled appliances • Apple smart device using iOS 7 or higher OR Android smart device using version 4.0 or higher • Wi-Fi® Router and internet connection
SMART SLOW COOKER
©2014 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. P.N. 173471 SPR-032714-072
1
Your Wi-Fi® network
will automatically
detect your smart
appliance(s). Select the
WeMo™ labeled Wi-Fi®
network for your
Smart Slow Cooker.
2 3 5
OR
OR
6
Quick Start Reference Guide
NOTE: To disable WeMo™ Remote
Control, disconnect the power
cord. WeMo™ Remote Control will
automatically be re-enabled when
the unit is plugged back in.
A check mark will
appear once you are
successfully connected
to your Smart Slow
Cooker. You can now
exit Settings.
4
To Next Page
Need help?
General
