Crockpot express CPE310 - Features of Your Express Easy Release XL; Before First Use of the Express Easy Release XL

54
Features of your Express Easy Release XL
CONTROL PANEL
UNDERSIDE OF Lid
Time Selection
Buttons
Status Bar
Display Screen
Gasket Fixing Ring
Steam Release
Valve Cover
Sealing Gasket
Bobber Valve
Plastic Spoon
Steaming Rack
Step 1. Remove Packaging
Ensure all packaging has been removed.
Step 2. Position Machine
Place the Heating Base facing you on a dry,
level surface.
Step 3. Wash Parts
Wash the Cooking Pot and Lid and
Condensation Collector in warm water
using a mild detergent. Dry each part
thoroughly before use.
Step 4. Assembly
Insert the Power Cord into the Power Cord
Port and insert the Cooking Pot into the
Heating Base.
Step 5. Lid Assembly
Place Lid upon cooker and align
with .
To lock, twist counterclockwise, aligning
with
. To unlock, twist Lid clockwise and
align
with .
Step 6: Sealing Gasket
Remove the Lid by turning clockwise to
unlock, aligning
with . Remove the
Sealing Gasket from the Lid and wash the
gasket and the Lid in warm soapy water.
Dry the Sealing Gasket and Lid thoroughly
before reattaching the Sealing Gasket to the
Lid. Ensure the Sealing Gasket is smoothly
and securely in place in the gasket holder.
If the Sealing Gasket is not in the correct
position the Lid will not be able to form a
seal and will not be able to gain pressure.
Before First Use of the Express Easy Release XL
Unlocked Lid Locked Lid
Open Lid
Figure 2