Overview
9 / 55
2.6Safety Information
Electrical Safety
◆Equipment must be grounded effectively;
◆To protect the equipment and personal safety, it is recommended to install indoor lightning arresting rod;
◆All maintenance work on the equipment must be carried out with the power off；
◆When the equipment is working, do not touch the moving parts of the machine with your hands or fingers.
Mechanical safety
◆Only under the circumstances necessary to dismantle the device casing;
◆Be attention to the machinery operation, always wear gloves, tools and parts must be placed in an orderly
manner；
◆Do not perform any maintenance or modifications to the equipment system that is not authorized by CRON.
◆Do not place any foreign objects on the device;
◆In non-emergency situations, it is strictly prohibited to press the emergency stop button;
◆In the operation of mechanical parts, always wear gloves, so as to avoid rusting parts; tools and parts should
be placed in order;
◆ Avoid overhead collision during equipment operation.
Other safety aspects
◆This device is not intended to be used in an explosive or potentially explosive atmosphere.
◆Fireworks is prohibited near the occasion of this device;
◆Prevent water or other liquids from flowing into the interior of the device;
◆Debris, scrap or residue generated from the use of this equipment must be handled in accordance with the
laws and regulations of the hazardous material management authority in the country / region in which it is
used.
Policy of equipment requirements
◆To ensure that customer’s installation site, environment and conditions, are able to meet and comply to the
equipment operational requirements.
To Next Page
Loading...