6
Upon delivery the Jukebox will be in
Transit
mode. Follow the guide below to put the
Jukebox into
Operation
mode.
i) Unlock the 2 side locks, and then lift the glass front cover until it clicks into the ‘safe’
position.
ii) Remove the horizontal transit bar (see fig. 2) by unscrewing the black capped retaining
screws at either end. Re-insert the screws once the bar is removed.
iii) Remove the vertical transit bar by twisting it counter clockwise.
This transit bars should be retained for future use. Do not store these inside the
machine.
MECHANISM IN
TRANSIT MODE
HORIZONTAL
TRANSIT BAR
RETAINING
SCREWS
VERTICAL
TRANSIT BAR
HORIZONTAL
TRANSIT BAR
FIG 2
To Next Page
Loading...
