English
5
Turntable Operation
1. Place the record on the turntable. Use the Record Adapter if necessary.
2. Rotate the On/Off Volume Knob to turn on the power.
3. Remove the stylus protector from the stylus assembly.
Note: To avoid stylus damage, make certain the included stylus guard is in place
whenever the turntable is being moved or cleaned.
4. Lift tonearm from the tonearm rest.
Note: When the turntable is not in use, remember to secure it to the tonearm rest.
5. Move the tonearm over the record to desired starting point, and gently lower
tonearm onto record.
6. When the record is finished playing, lift tonearm, and return it to the Tonearm
Rest.
7. Push the tonearm into the tonearm rest.
Aux Output Connection
You can connect speakers to this unit and play your music through your
speakers. To do this, connect the 3.5mm auxiliary cable between your active
speakers and the Headphone/Aux Out Jack of this unit and start playing the
music.
Pitch Control
The turntable speed can be increased or decreased by approximately 10% by
pushing the Pitch Control up or down. To increase the speed, push the Pitch
Control up. To decrease the speed, push the Pitch Control down.
To Next Page
Loading...
Need help?
General
