English
9
Troubleshooting
There is no power
No power at the power outlet.
To help save power consumption, some models will comply with the ERP
energy saving standard. When there is no audio input for 20 minutes, the
power will automatically cut-off. To turn power back on and resume playing,
turn off the main power switch and turn it on again.
Power is on, but the platter does not turn
Turntable mode is not selected.
Turntable’s drive belt has slipped off.
An aux in cable is plugged into the aux in jack, unplug it.
Turntable is spinning, but there is no sound, or sound not loud enough
Stylus protector is still on.
Tone arm is lifted up by the lever.
CD does not play
Function mode is not set to CD.
The CD is blank.
The CD is placed on the tray incorrectly with the label side facing down.
The CD has unsupported digital audio files like MP3 and similar types of
format.
The CD has too many scratches or is dirty.
To Next Page
Loading...
Need help?
General
