Radio Operation
1 Slide the FUNCTION SWITCH (4) to select
RADIO mode.
2 Press the AM/FM BUTTON (5) to the desired
radio band (AM or FM ).
3 Select the desired radio station by rotating
TUNING KNOB (19).
4 Adjust the VOLUME KNOB (3) to the desired
sound level.
Antenna: for FM reception, the unit is provided with
a FM WIRE ANTENNA (31), move the wire until the
reception is clear and with no interferences. For AM
reception, the unit is provided with a directional build-
in ferrite antenna. Rotate the set to find the position
in which the best reception is obtained. Do not
connect the FM WIRE ANTENNA (31) to any outside
antenna.
Control Locators
Unit Controls
22 Spindle
23 Turntable
24 Adapter For 45 rpm Records
25 Tone Arm
26 Speed Control Switch
27 Tone Arm Rest
28 Speaker Int. /Ext. Switch
29 Line Out Jack
30 External Speaker Jack
31 FM Wire Antenna
32 AC Power Cord
5
Cassette & Radio Operation
Cassette Operation
1 Slide the FUNCTION SWITCH (4) to select
CASSETTE mode.
2 Insert a prerecorded tape through
the
CASSETTE
DOOR (21) . Tape will slide into the cassette
mechanism and start playing.
3 Adjust the volume level by turning the VOLUME
KNOB (3).
4 For fast forwarding, press the CASSETTE
EJECT/F.F (20) half way in. Pressing again, will
stop the fast forwarding and return the cassette
to the playing mode.
5 To stop and eject the cassette, press the
CASSETTE EJECT/F.F (20) in completely.
6 When one side of the tape finishes playing, the
cassette will automatically stop.
NOTE: Remove the tape from the unit when it is not
in use or stopped.
8
22 23 24
252627
32
31
Antenna
28
29 30
R
LINE OUT
INT. EXT.
L
To Next Page
Loading...
Need help?
General