Crosley CT201A - Page 7

English
7
Cassette Recording
MICROPHONE to TAPE
1. Set the Function Switch to TAPE position
2. Insert a cassette tape, and press the RECORD button to record the sounds
through the microphone.
Note: To prevent accidental recording, break off the cassette tab from side A or B.
3. To pause recoding, press the Pause button.
4. To stop recording, press the Stop/Eject button.
RADIO to TAPE
1. Set the Function Switch to RADIO position
2. Insert a cassette tape, and press the RECORD button to record the sounds
from the radio.
Note: To prevent accidental recording, break off the cassette tab from side A or B.
3. To record, press the Record button to start recording.
4. To pause recoding, press the Pause button.
5. To stop recording, press the Stop/Eject button.
USB/SD to TAPE
1. Set the Function Switch to BT/USB/SD position
2. Insert a cassette tape, and press the RECORD button to record the sounds
from USB/SD.
Note: To prevent accidental recording, break off the cassette tab from side A or B.