Cross Tools CPG 3000 V - Scope of Delivery; Generator Unit; 2 x Feet for Mobile Installation; 2 x Complete Wheel

Translation of the original operating instructions
2
2. Scope of delivery
The following parts can be found in packaging. Ensure that all the parts are intact.
• Manual
• Generator unit
• 2 x feet for mobile installation
▪ Shaped metal parts
▪ Rubber buffers
▪ Nuts for rubber buffers (size 13)
▪ 2 x screws (size 10)
▪ 2 x nuts (size 10)
• 1 x rod
• 4 x washer
• 2 x split pin
• 2 x handles
▪ 4 x screws (size 10)
▪ 4 x nuts (size 10)
• 2 x complete wheel
• Spark plug wrench
Depending on the purpose of the application, additional accessories may be necessary
Hint: If possible, keep the packing until the warranty period has expired.
3. Technical Data
Modell
CPG 3000 V
Protection type
IP23M
Continuous power rating P
rated
(kW)
2500 W
Max. power P
max
2600 W, S2 5 min.
Rated voltage U
rated
(V)
230V~
Rated current I
rated
(A)
11A
Frequency F
rated
(Hz)
50 Hz
Quantity and type of sockets
2*230V~
Motor typ
QS168F-1
Engine approval number
e24*2016/1628* 2018/989 SRA1/P*0183*00(V)
Capacity (cm³)
196 cm³
Max. power (kW / PS)
3.85 kW / 5.2 PS
Fuel type
90 Octane (E10)
Power factor cos φ
1
Power class
G1
Max. ambient temperatue
40 °C
Max. installation height (above normal null) (m)
1000 m üNN
Spark plug type
LDF6TC
Oil quantity
0.6 Liter
Recommended oil specification
SAW 10 W 40
Tank content
15 l
Usable tank contents
12 l
Running period with 1/1 load
7 h
Running period with 2/3 load
9 h
Running period with 1/2 load
11 h
Dimension of device: l x b x h (mm)
605 x 430 x 425 mm
21