BA_Migros_ED3EX_GB 09.02.2011 12:13 Uhr Seite 37
Probedruck
C M Y CM MY CY CMY K
Error Messages in the Display
Error states are automatically recognised by the system and
indicated in the display. The following messages indicate the
problems described below:
Should a “Notice” signal be given in the display, please follow
the instructions in the display or the instructions given under
its meaning. Should the display indicate an ERROR signal then
you must immediately contact your local dealer for further
inspection.
Display Type Meaning
BATTERY EMPTY! Notice The battery is empty and must be recharged
BITTE ANHALTEN! Notice Please stop for recalibration of the
operating mode P1-P3.
AKKU ERR.01 Error The SMBus-connection on the battery is faulty
GESCHWSENS ERR.01 Error The external speed sensor is faulty
MOTORSTROM ERR.01 Error Excess current has been detected
HALLSENS ERR.01 Error Check motor.
GB
133
Pedelec with Lithium-ion battery
To Next Page
Loading...