Fixing Accessories Gasman
18
V. Fixing Accessories
Clip Accessories
Gasman is supplied with an alligator clip. Other clip options are:
Hard hat clip
Allows Gasman to be clipped to a hard hat, a method of wearing a
portable gas detector preferred by many users.
Pocket Clip
Allows Gasman to be clipped to a pocket, near the breathing zone of
the user.
Universal harness plate
Crowcon provide a universal harness plate which can be used with either
a chest harness or a shoulder strap.
How to wear your Gasman unit
Chest harness
Use the M3 fixing (usable once the
clip has been removed) on the back
of your Gasman unit to attach the
chest harness plate. Create a chest
harness by attaching one strap to the
top connectors, to go around the neck,
and the other to link around the waist
using the side connectors. Adjust the
strap lengths until the Gasman unit is in
a comfortable working position.
Shoulder strap
With the universal harness plate in place on the belt clip, attach the
shoulder strap accessory onto the top connectors. Adjust to a comfortable
working position.
See Accessories, section XI, for full list.
Shoulder/neck
connectors
Chest harness plate
Waist
connectors
M3 nut
To Next Page
Loading...