Crowcon Gasman - Data Logging Capabilities

To Next Page

To Previous Page

Gasman PC interface and software

Data logging

Data is logged at a rate set by the log period which is configurable via

Portables PC software. This is set at 1 minute intervals as a default.

The Gasman is capable of storing 54,000 logs (>4,800 events). When the

memory is filled, new data then overwrites the oldest data.

A log can be extracted from the Gasman and saved using Portables PC

software.

The instrument will record the following events:

• Switch on/off

• Battery status

• Sensor channel over-range

• Alarms activated/cleared (including peak values of response)

• Gas test pass/fail

• Usertriggeredevent

For more information on using Crowcon Portables PC software see the

installed help file.