Trouble shooting
Before calling the customer services,please check that the appliance is
correctly connected,any of the following cases are not covered by the
guarantee
> Damage caused by improper use,storage or maintenance.
> Damage caused by unauthorised disassembly and repair.
> Damage caused by misuse.
> Using the ceramic hob for commercial purposes.
If an abnormality comes up,the ceramic hob will enter the protective state
automatically and display corresponding protective codes:
Water or pot on the glass over the
control
The temperature inside the
appliance was too high
The appliance must be stopped
and cooling
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages
to the ceramic hob and please contact the supplier.
Technical Specification
CROWN VCP 32
Building-in Dimensions A×B (mm)
Weight and dimensions are approximate. Because we continually strive to
improve our products we may change specifications and designs without prior
notice.
To Next Page