Crown XL Series User Manual

XLS Series
Operation Manual
©2001 by Crown International P.O. Box 1000, Elkhart, Indiana 46515-1000 U.S.A. Telephone: 574-294-8000
Some models may be exported under the name Amcron.®
Trademark Notice: Crown
®
and Amcron
®
are registered trademarks of Crown Audio, Inc. Other trademarks are the property of their
respective owners.
Obtaining Other Language Versions: To obtain information in another language about the use of this product, please contact your
local Crown Distributor. If you need assistance locating your local distributor, please contact Crown at 574-294-8000.
This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible
situation which may arise during installation, operation or maintenance.
The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may
have occurred.
133465-3
11/01
XLS 202
XLS 402
XLS 602

Crown XL Series Specifications

General

Total Harmonic Distortion	<0.5%
Channels	2
Voltage Gain	32dB
Power Output (per channel at 4 ohms)	Varies by model. See individual model specifications (XL1000, XL1500, XL2000, XL2500)
Power Output (per channel at 8 ohms)	Varies by model. See individual model specifications (XL1000, XL1500, XL2000, XL2500)
Frequency Response	20Hz - 20kHz
Signal to Noise Ratio	>100 dB
Input Sensitivity	1.4V
Weight	Varies by model. See individual model specifications (XL1000, XL1500, XL2000, XL2500)
2 Ohm Stereo (per channel)	Varies by model. See individual model specifications (XL1000, XL1500, XL2000, XL2500)
8 Ohm Bridged-Mono	Varies by model. See individual model specifications (XL1000, XL1500, XL2000, XL2500)
4 Ohm Bridged-Mono	Varies by model. See individual model specifications (XL1000, XL1500, XL2000, XL2500)
Input Impedance	20 kOhms
Cooling	Forced-air cooling