Crown S Series User Manual

Operation Manual
S-2
Obtaining Other Language Versions: To obtain information in another language about the use of this product, please contact your
local Crown Distributor. If you need assistance locating your local distributor, please contact Crown at 574-294-8000.
This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible
situation which may arise during installation, operation or maintenance.
The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have
occurred.
To obtain the latest version of this manual, please visit the Crown website at www.crownaudio.com.
Trademark Notice: Crown, Crown Audio, and Amcron are registered trademarks of Crown International. Other trademarks are the
property of their respective owners.
Some models may be exported under the name Amcron.
®
©2005 by Crown Audio
®
Inc., 1718 W. Mishawaka Rd., Elkhart, IN 46517-9439 U.S.A. Telephone: 574-294-8000
126941-3A
6/05
S-Series
S-3

Crown S Series Specifications

General

Brand	Crown
Model	S Series
Category	Amplifier
Language	English

Summary

Important Safety Instructions

2 Setup

2.2 Install Your Amplifier

Guidance on disconnecting power, using an equipment rack, and stacking amplifiers.

2.3 Ensure Proper Cooling

Details on rack mounting, air vent clearance, and airflow illustration for optimal cooling.

2.4 Choose Input Wire and Connectors

Explains options for balanced/unbalanced wiring and connector types (1/4-inch, XLR, barrier strip).

2.5 Choose Output Wire and Connectors

Recommends wire types, connectors (Speakon, barrier strip, binding post), and provides wire gauge guidelines.

2.6 Wire Your System

Covers wiring for Stereo Mode, paralleling inputs using Y-cables or jumpers, and Bridge-Mono mode.

2.7 Input Sensitivity Switch

2.8 Connect to AC Mains

Instructions for connecting the amplifier to the AC power source, emphasizing grounding safety.

2.9 Startup Procedure

3 Operation

3.1 Precautions

3.2 Controls, Indicators and Connectors

Details the front and rear panel controls, indicators (Power, Signal, Clip, Fault), and various input/output connectors.

3.3 Front Panel Controls and Indicators

3.4 Back Panel Controls and Connectors

4 Advanced Features and Options

4.1 Protection Systems

Details various protection systems: Bias Servo, Fault, RF Protection, Drive Protection, Compression, Circuit Breaker, and Fan.

4.2.2 Fault Monitoring

5 Principles of Operation

6 Troubleshooting

7 Specifications

8 Service

9 Warranty