Do you have a question about the Crown LPS-1500 and is the answer not in the manual?
Channels | 2 |
---|---|
Signal to Noise Ratio | > 100dB |
Input Sensitivity | 1.4V |
Frequency Response | 20Hz - 20kHz |
Total Harmonic Distortion | <0.5% |
Input Impedance | 20kΩ balanced, 10kΩ unbalanced |
Connectors | XLR, 1/4" TRS |
Dimensions | 19" x 3.5" |
Cooling | Forced air |
Details of the European representative for compliance.
Lists electromagnetic compatibility standards met by the product.
Specifies the safety standard followed for the product.
Essential safety guidelines for operating the amplifier.
Advice on placing sensitive equipment near the amplifier.
Details regarding compliance with FCC regulations.
Description of the controls and LEDs on the front panel.
Description of the rear panel connections and switches.
How to wire speakers in stereo mode using Speakon connectors.
How to wire speakers in stereo mode using binding posts.
How to wire speakers in bridge-mono mode using Speakon connectors.
How to wire speakers in bridge-mono mode using binding posts.
How to wire speakers in parallel mode using Speakon connectors.
How to wire speakers in parallel mode using binding posts.
Overview of the one-year limited warranty.
Items and conditions not covered by the Crown warranty.
What the warrantor will do to remedy defects.
Steps to follow for requesting warranty service.
Limitations on recovering incidental or consequential damages.
Policy on warranty modifications and product design changes.
Purchaser's legal rights under the warranty.