Need help?Do you have a question about the Crown D-75 and is the answer not in the manual?
General| Cooling | Convection cooled |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Total Harmonic Distortion | <0.05% at rated power |
| Signal to Noise Ratio | >100 dB |
| Input Sensitivity | 0.775V for rated power |
| Weight | 10 lbs |
| Damping Factor | >400 |
| Input Impedance | 20 kOhms balanced, 10 kOhms unbalanced |
| Dimensions | 19" W x 1.75" H x 8.5" D |
Provides a summary of the product warranty terms and duration, covering defects in materials and workmanship.
Lists specific conditions and damages not covered by the warranty, such as misuse, accident, or neglect.
Outlines Crown's responsibilities for repairing or replacing defective products, including refund options.
Provides instructions for initiating and receiving warranty service, including contact and shipping procedures.
Explains the AC line safety fuse and its required ratings.
Monitors output during service and testing.
Checks resistance and voltages for service.
Essential safety precautions before servicing the unit, including electrical shock prevention.
Procedures for disassembling the amplifier for service access, including cover and board removal.
Guides users through identifying and resolving problems with the amplifier, starting with symptoms.
Outlines specific tests and their expected results for service and checkout.
Explains the voltage-current limiting protection mechanisms against hazards.
Lists general performance parameters and physical characteristics of the amplifier.
Specifies performance metrics for monaural operation.
Specifies performance metrics for stereo operation.
Details on connecting inputs, outputs, and stereo/mono modes, with wiring differences.
Recommended precautions for safe and optimal amplifier operation, covering input levels and handling.
Explains the amplifier's built-in protection features against various hazards.
Step-by-step instructions for safely replacing the amplifier's fuse.
To Next Page
