A
Austin FletcherJul 25, 2025
What to do if Crown Amplifier doesn't turn on?
- Ppaul82Jul 25, 2025
If your Crown Amplifier isn't turning on, make sure that the amplifier’s Power switch is on and the amplifier’s power cord is plugged in.
To Next PageTo Next PageWhat to do if Crown Amplifier doesn't turn on?
If your Crown Amplifier isn't turning on, make sure that the amplifier’s Power switch is on and the amplifier’s power cord is plugged in.
Why is my Crown Amplifier sound distorted?
Distorted sound from your Crown Amplifier can occur if the input signal level is too high. To resolve this, turn down your amplifier's Level controls.
General| Total Harmonic Distortion | < 0.5% |
|---|---|
| Signal to Noise Ratio | > 100 dB |
| Input Sensitivity | 1.4V |
| Channels | 2 |
| Power Output (4-ohm Dual) | 275W |
| Power Output (8-ohm Bridge) | 350W |
| Frequency Response | 20 Hz - 20 kHz |
| Dimensions | 19" x 3.5" |
| Input Impedance | 20k ohm balanced, 10k ohm unbalanced |
| Cooling | Continuously variable speed fan |
| Power Requirements | 100V-240V ~ 50/60 Hz |
Essential safety guidelines for operating the amplifier.
Guidelines for selecting and connecting input cables and connectors.
Detailed wiring instructions for dual-channel stereo operation.
Wiring configuration for bridge-mono operation.
Recommendations for selecting appropriate output wire gauge and connectors.
Description of the rear panel connectors for specific CDi models.
Description of the rear panel connectors for the CDi 6K model.
Detailed explanation of the front panel interface, buttons, and indicators.
Guide to understanding indicator lights for normal and abnormal operation.
Common issues like no sound, distorted sound, and no power.
Summary of the warranty period, coverage, and items excluded.