Crown Micro-Tech MT-1000 User Manual

Overview of the Crown Micro-Tech 1000 stereo power amplifier's features and technology.

Details on protection, input/output, power supply, dimensions, and weight.

Power output, frequency response, distortion, and slew rate for stereo operation.

Power output, distortion, and impedance for parallel mono configuration.

Power output, distortion, and impedance for bridge mono configuration.

Graphical representations of frequency response, phase response, power output, and distortion.

Instructions for inspecting the unit for transit damage and saving packing materials.

Guidelines for rack mounting or stacking the amplifier, including dimensions.

Essential safety advice and precautions to prevent damage or injury during operation.

Guidance on connecting speaker cables and appropriate connectors to the amplifier outputs.

Procedures for setting up either parallel or bridge mono operation for specific load impedances.

How to connect input signals, including advice on filtering and preventing ground loops.

Details on connecting the AC power cord and voltage requirements.

Steps for adjusting input level controls and understanding indicator lights.

Explanation of internal circuits designed to protect the amplifier and loudspeakers from faults.

Methods and recommendations for using fuses or other devices to protect loudspeakers.

Instructions for cleaning the unit's dust filter and heat sinks.

Overview of the amplifier's advanced technology, including computer simulation and heat sink design.

Explanation of the amplifier's circuit design and signal flow using block diagrams.

Detailed explanation of the circuitry and principles behind bridge mono mode.

Detailed explanation of the circuitry and principles behind parallel mono mode.

Instructions for changing the amplifier's input sensitivity from 0.775V to 2.2V.

Information on the built-in cooling fan and available low-velocity replacement.