Crown XLS 2500 Series User Manual

Obtaining Other Language Versions: To obtain information in another language about the use of this product, please contact your local Crown Distributor. If you need
assistance locating your local distributor, please contact Crown at 574-294-8000.
This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible situation which may arise during
installation, operation or maintenance.
The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have occurred. To obtain the latest
version of this manual, please visit the Crown website at www.crownaudio.com.
Trademark Notice: Crown, Crown Audio, and Amcron are registered trademarks of Crown International. Other trademarks are the property of their respective owners.
Later versions of this manual and additional information about this product may be available at the Crown website at www.crownaudio.com.
Some models may be exported under the name Amcron
®
©2010 by Crown Audio
®
, Inc., 1718 W. Mishawaka Rd., Elkhart, Indiana 46517-9439 U.S.A. Telephone: 574-294-8000.
XLS 1000
XLS 2000
XLS 1500
XLS 2500
XLS Series Operation Manual
142169-1 - 3/10

Crown XLS 2500 Series Specifications

General

Power Output (2 Ohms)	775W
Power Output (Bridged 4 Ohms)	1550W
Frequency Response	20 Hz - 20 kHz, +0/-1 dB
Total Harmonic Distortion	< 0.5%
Input Sensitivity	1.4V
Damping Factor	> 200
Input Impedance	20 kOhms balanced, 10 kOhms unbalanced
Signal to Noise Ratio	103dB
Connectors	XLR
Dimensions	19" x 3.5"
Voltage	100V-240V
Weight	10.9 lbs

Summary

Important Safety Instructions

Warning Symbols

Alerts users to the meaning of lightning bolt and exclamation point symbols for electrical shock and operational guidance.

Magnetic Field Hazard

Warns about strong magnetic fields affecting sensitive equipment and recommends specific rack placement for safety.

FCC Compliance Notice

Details FCC compliance rules, device operation conditions, and measures to correct potential radio interference.

Get Started Modes

Stereo Bypass Mode

Explains the default stereo mode with PureBand Crossover Bypassed and provides connection steps for signal and speakers.

Bridge-Mono Mode

Describes delivering power of both channels into a single load, with connection and configuration steps for bridge operation.

Crossover Mode

Explains configuring filters for Channel 1 (LowPass) and Channel 2 (HighPass) with setup steps for crossover functionality.

Advanced Get Started Modes

HighPass Mode

Explains configuring HighPass Filters on both channels at a selected frequency, including setup steps and frequency selection.

LowPass Mode

Explains configuring LowPass Filters on both channels at a selected frequency, including setup steps and frequency selection.

Welcome

Product Features

Lists key features like Class-D amplifier, PureBand Crossover, Peak Limiters, input compatibility, and warranty.

Manual Usage Guide

Advises on reading instructions, warnings, and registering the product for optimal service and protection.

Front Panel Features

Indicators and Controls

Details front panel indicators (Signal, Clip, Thermal) and controls (Gain, Mode/Menu, LCD Screen, Power Button).

Back Panel Features

Output and Input Connectors

Describes back panel outputs (Binding Post, Speakon) and inputs (RCA, 1/4 Inch, XLR), including wiring and loop-thru options.

Integrated Processing Features

PureBand Crossover System

Explains the variable state Linkwitz-Riley 24dB/octave filter, available frequencies, and operational modes (Crossover, LowPass, HighPass, Bridge).

Peak Limiters

Details the Peak Clip Limiters for performance enhancement and speaker protection, and instructions for engagement/disengagement.