To Next PageTo Next Page
Need help?Do you have a question about the Crown XLS Series and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| THD | < 0.5% |
| Input Impedance | 20 kOhms (Balanced), 10 kOhms (Unbalanced) |
| Damping Factor | > 200 |
| Protection | Short circuit, overload, thermal |
| Connectors (Input) | XLR |
| Connectors (Output) | Binding Posts |
| Weight | 8.6 kg |
| 8 Ohm Stereo (per channel) | 215W |
| Signal to Noise Ratio | 103dB (A weighted) |
| Input Sensitivity | 1.4V |
Introduces the Crown XLS Series amplifiers, highlighting their quality and design principles.
Displays the XLS 202, XLS 402, and XLS 602 models with their respective images.
Provides 15 essential instructions for safe operation and maintenance of the amplifier.
Highlights critical warnings about electrical shock hazards and not removing covers.
Details the amplifier's compliance with FCC rules and potential interference guidelines.
Lists the equipment type, family name, and specific model numbers covered by the declaration.
Outlines the various EMC and safety standards the XLS Series amplifiers comply with.
Highlights the XLS Series' design, ruggedness, cooling, and interface features.
Advises users on how to effectively use the manual for setup and operation.
Instructions for unpacking the amplifier and checking for transit damage.
Guidance on installing the amplifier in a standard 19-inch equipment rack.
Details requirements for airflow and ventilation to prevent overheating.
Recommends balanced line (XLR) or unbalanced input cables and connectors.
Advises on selecting high-quality speaker wire and connectors like Speakon or binding posts.
Explains how to wire speakers for stereo operation using Speakon or binding post connectors.
Details the specific wiring and level control settings for bridge-mono operation.
Instructions for connecting the amplifier to the AC mains power supply safely.
Step-by-step guide for powering on the amplifier and setting initial levels.
Recommendations for protecting speakers from clipping and subsonic signals.
Lists important precautions for optimal performance and safety during operation.
Warns against operating with incorrect load impedance or driving the amplifier into clipping.
Identifies and explains the function of front panel controls like level controls, power switch, and LEDs.
Details the back panel components including power connector, XLR inputs, fans, and output jacks.
Describes protection systems like Output Current Limiting, DC Protection, and Thermal Protection.
Lists the circuit breaker amperage ratings for different models and voltages.
Guides users on diagnosing issues based on indicator lights and sound output.
Provides steps to troubleshoot problems like no sound, distorted sound, or fault conditions.
Details power output ratings for different impedance loads and voltage configurations.
Lists performance data such as sensitivity, frequency response, and distortion levels.
Provides additional performance specs like damping factor, crosstalk, and input impedance.
Covers ventilation, cooling, dimensions, and weight specifications.
Explains how to calculate AC power draw and thermal dissipation based on duty cycles and efficiency.
Provides tables detailing AC mains power draw, current draw, and thermal dissipation for the XLS 202 at various duty cycles.
Presents tables for the XLS 402 showing AC power draw, current draw, and thermal dissipation at various duty cycles.
Displays tables for the XLS 602 detailing AC mains power draw, current draw, and thermal dissipation at various duty cycles.
Outlines how to obtain service globally and specifically in the US and Canada.
Provides instructions for sending the unit to the factory for service, including obtaining an RA number.
Details the 3-year no-fault warranty for Crown products in the US and Canada.
Lists items excluded from the warranty, such as damage from misuse or serial number alteration.
Covers warranty terms and service procedures for regions outside the US and Canada.
Addresses disclaimers for consequential damages and legal rights of the purchaser.
Provides fields for owner, shipping, model, problem description, and payment for factory service.
