Crown DriveCore XLS 1002 User Manual (English)

To Next Page

Product Registration: Register your new product at http://warranty.harmanpro.com.

Obtaining Other Language Versions: To obtain information in another language about the use of this product, please contact your local HARMAN Professional

Distributor. If you need assistance locating your local distributor, please visit www.crownaudio.com/where_to_buy.

This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible situation which may arise during

installation, operation or maintenance.

The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have occurred. To obtain the latest

version of this manual, please visit the Crown website at www.crownaudio.com.

Trademark Notice: Crown, Crown Audio, and Amcron are registered trademarks of Crown International. Other trademarks are the property of their respective owners.

Later versions of this manual and additional information about this product may be available at the Crown website at www.crownaudio.com.

Warranty & Product Registration: Register your new Crown ampliﬁer at http://warranty.harmanpro.com

Some models may be exported under the name Amcron

XLS 1002

XLS 2002

XLS 1502

XLS 2502

XLS DriveCore

2 Series

Operation Manual

5055568 - 04/15

Need help?

Do you have a question about the Crown DriveCore XLS 1002 and is the answer not in the manual?

Crown DriveCore XLS 1002 Specifications

General

Channels	2
Power Output (8 Ohms)	215W
Power Output (4 Ohms)	350W
Power 8 Ohms	215W
Frequency Response	20 Hz - 20 kHz
Total Harmonic Distortion (THD)	< 0.5%
Signal to Noise Ratio	> 100 dB
Input Sensitivity	1.4 V
Cooling	Convection
THD at full power	< 0.5%
Signal-to-Noise Ratio	> 100 dB
Damping Factor	> 200
Input Impedance	20 kOhm balanced, 10 kOhm unbalanced
Connectors	XLR, TRS, RCA
Power Requirements	100-240V, 50/60Hz