To Next PageTo Next Page
Need help?Do you have a question about the Crown XLS 602 and is the answer not in the manual?
General| Power Output (Stereo Mode) | 380W per channel at 4 ohms, 600W per channel at 2 ohms |
|---|---|
| Power Output (Bridged Mono Mode) | 1200W at 4 ohms |
| Frequency Response | 20 Hz - 20 kHz, +0/-1 dB |
| Total Harmonic Distortion | < 0.5% |
| Signal to Noise Ratio | > 100 dB |
| Input Sensitivity | 1.4V |
| Input Impedance | 20k ohms balanced, 10k ohms unbalanced |
| Damping Factor | > 200 |
| Power Requirements | 100V-240V ~ 50/60Hz |
Lists electromagnetic compatibility standards the product complies with.
Lists safety requirements for audio video and similar electronic apparatus.
Highlights key features and design principles of the XLS Series amplifiers.
Guides users on how to effectively use the operation manual for optimal service.
Instructions for unpacking and inspecting the amplifier for shipping damage.
Guidelines for safely installing the amplifier in a rack or on a stable surface.
Recommendations for maintaining adequate airflow and ventilation for optimal performance.
Advice on selecting appropriate input cables and connectors for amplifier connection.
Guidance on selecting suitable output wires and connectors for speaker connections.
Detailed instructions for wiring speakers in stereo and bridge-mono modes.
Procedures for connecting the amplifier to the AC power source safely.
Tips on preventing speaker damage from clipping and subsonic signals.
Step-by-step guide for safely powering on the amplifier for the first time.
Important safety and performance precautions for operating the amplifier.
Explanation of the controls and indicators found on the amplifier's front panel.
Description of the ports, connectors, and controls on the amplifier's back panel.
Details on the amplifier's built-in protection and diagnostic capabilities.
Information on obtaining service for the amplifier globally through authorized centers.
Details on how to get service for the amplifier within the US and Canada.
Overview of the warranty coverage provided for Crown products.
Lists conditions and situations not covered by the Crown warranty.
Explains Crown's responsibilities and actions to remedy defects.
Details warranty terms specific to customers in the US and Canada.
Instructions on the process for obtaining warranty service.
Legal limitations regarding consequential and incidental damages.
Information about limitations on modifying or amending the warranty terms.
Statement on Crown's right to make design changes without notice.
Outlines the legal rights of the purchaser under the warranty.
