Need help?Do you have a question about the Crunch Groundpounder GPX1000.4 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Power Output (RMS) | 1000 Watts |
| RMS Power @ 4 Ohms | 125 Watts x 4 |
| RMS Power @ 2 Ohms | 250 Watts x 4 |
| Bridged RMS Power @ 4 Ohms | 500 Watts x 2 |
| Total RMS Power | 1000 Watts |
| THD at Rated Power | <0.05% |
| Damping Factor | >150 |
| Input Sensitivity | 200mV - 6V |
| Bass Boost Frequency | 45Hz |
| Crossover Type | Variable |
Details both RMS and maximum output power at various impedance configurations.
Covers impedance, frequency response, THD, SNR, and input sensitivity.
Explains the adjustable high-pass, low-pass filters, and bass boost function.
Specifies operating voltage, fuse rating, and physical dimensions of the amplifier.
Explains how to properly connect the amplifier's power supply and remote turn-on wire.
Guides on routing audio signal cables to prevent interference from power cables.
Adjusting the input signal level for optimal amplifier performance and noise reduction.
Configuring high-pass and low-pass filters for speaker types and subwoofer.
Utilizing the switchable bass boost for enhanced low-frequency output.
To Next Page
