Need help?Do you have a question about the Crunch GTR2000D and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Peak Power | 4000W |
| Signal to Noise Ratio | >90 dB |
| Bass Boost | 0-12dB |
| Amplifier Class | Class D |
| Frequency Response | 10Hz - 250Hz |
| Crossover | Variable |
| Input Sensitivity | 0.2V - 6V |
| Phase Shift | 0-180° |
Discusses the importance of system design and execution for optimal car stereo performance.
Provides recommendations for mounting amplifiers horizontally for heat dissipation and avoiding noise sources.
Details power, ground, and signal cable routing to minimize noise and ensure reliable connections.
Step-by-step procedure for safely powering up the system for the first time to prevent damage.
Highlights common features across all GTR Series amplifiers, including crossover options and protection systems.
Details specific features and controls for the GTR1100.2 2-channel amplifier model.
Outlines the features and operational modes of the GTR1000.4 4-channel amplifier.
Describes the characteristics and specifications of the 1-channel mono block amplifiers.
Illustrates the basic setup for using the GTR1100.2 in a full-range stereo configuration.
Details the method for bridging the GTR1100.2 for mono subwoofer operation.
Setup for a 2-way active or bi-amplified system using the GTR1100.2 for highs and lows.
Configuration for using the GTR1000.4 as a discrete 4-channel full-range amplifier.
Utilizing the GTR1000.4 for 2 or 3-channel systems via mono bridging.
Standard setup for using the mono block amplifiers for subwoofer applications.
Specific settings for High Pass, Bass EQ, and Low Pass on GTR110.2 and GTR1000.4 amplifiers.
Specific settings for Subsonic, Bass EQ, and Low Pass on mono block amplifiers.
Procedure for matching amplifier input sensitivity to head unit output signal level for optimal performance.
Explains the diagnostic system that indicates faults via the PROTECT LED and how to identify the cause.
Addresses causes and solutions for amplifier heatsink overheating and low output power issues.
Troubleshooting common problems like blowing fuses and the system not turning on.
Covers common noise issues including hiss, electrical interference, ticking, and whining.
Details what is covered, excluded, and the process for warranty claims.
Information regarding how to obtain extended warranty coverage for Maxxsonics products.
Converter for high-level speaker wires to RCA low-level outputs with parametric EQ.
Controller for shaping subwoofer output signals, including Bass Boost and Low Pass.
Converter for high-level speaker wires to RCA low-level outputs with additional features.
Converter for high-level speaker wires to RCA low-level outputs, designed for adding subwoofers.
Details the master/slave linking capabilities for mono amplifiers and its integrated features.
To Next Page